Welcome to the easeU glove Quick Start Guide
1. Preparation
Check the devices for visible damage. All the necessary parts are in working order and complete. Ensure that the right
and left device are correctly assigned using the “L” and “R” markings on the base.
2. Put on
Insert your hands under the housings and guide your thumbs through the cuff openings. Attach the finger elements,
ensuring the cables do not cross. The turquoise silicone pads must sit on the top of the fingers, on the nail side.
3. User interface
The central button(1) controls all functions.
Around it, the therapy progress indicator(2) shows the elapsed therapy time, while the battery display(3) is positioned below.
4. Turn on
Press the central button briefly (1 second) on both devices
to power them on. Rotating rings indicate pairing mode.
When they stop, press either central button to start stimulation. The devices stimulate for one hour.
5. Wake up & pause
If no button is pressed for 2 minutes, the devices enter sleep mode. Press either central button briefly to wake them up. Press either button briefly once again to pause the stimulation. Press once more briefly to resume stimulation.
6. Turn off
To switch the devices off, first wake them with a short press
(1 second) if they are in sleep mode. Then press once more briefly to pause the stimulation. Finally, press and hold either central button for 3 seconds to switch the devices off.
7. Charge
Connect your easeU device to a power socket using the cable supplied and a the power adapter. Unplug the charging cable after charging and before using the device for therapy
8. Clean
The cuffs can be washed. The device may only be cleaned
with a slightly damp cloth. Always disconnect the electronic unit before washing the cuffs. Please refer to the operating instructions for further cleaning information.
9. Reset
In case of problems, the device can easily be reset. In order to do so, press and hold central button for 15 seconds.